Activ Power J202 White 65W Nail Drill Machine for Manicure and Pedicure

The Activ Power J202 nail drill is an ideal device for professional manicure and pedicure. It efficiently prepares nails for further treatment and significantly simplifies the removal of remnants from previous nail work. Thanks to its well-balanced handpiece, thoughtful features, and multiple available options, it is perfect for professional use.

Setup and Connection

1. Connect the handpiece plug to the handpiece socket on the control unit.

2. If needed, connect the foot pedal to the foot pedal socket.

3. Choose the appropriate bit and insert it into the handpiece (refer to the instructions for installation and removal of bits).

4. Turn the speed control knob to the left.

5. Plug the power cord into an electrical outlet.

Important Notes:

• Always start working at the minimum speed.

• Ensure the drill is at minimum speed before changing the rotation direction.

• If the power indicator LED does not light up, check the fuse and replace it if necessary.

Permissible Speed

• The permissible speed may slightly vary depending on the type or material of the drill bit.

Precautions:

• Use only the recommended drill bits.

• Remove any debris before changing bits.

• Do not exceed the maximum speed specified by the manufacturer or distributor for the bit being used.

• Large bits may start to vibrate even below the maximum nominal speed. In such cases, immediately reduce the speed to prevent damage to the bit or injury to the user.