Lunamoon Jelly Gelly 15 ml - 03

Product detailed description

JELLY GELLY – is a material with a dense, jelly-like and plastic texture, used for modeling the nail plate, filling corners, and creating various designs. The gel can be applied in a way that eliminates the need for subsequent nail filing, speeding up the nail extension process.

Properties:

• Has a thick consistency.

• Does not cause a burning sensation under the lamp due to its low-temperature composition.

• Holds the C-curve shape excellently and does not deform.

• Acid-free.

• Has medium pigmentation, covers the free edge.

• Suitable for extension "on upper forms".

• Thickens in cooler places, thins in warmth.

• Thixotropic – becomes more fluid when worked with a brush.

• Can be additionally warmed to make it thinner.

• Hard and durable.

• Does not shrink and holds the C-curve excellently.

• Requires a Rubber Base underlay.

• Polymerization wavelength: 380–420 nm.

• UV/LED lamp power: 36-48 W.

• Recommended application layer thickness: 0.5 mm on the tip / 1 mm at the apex.

• Full polymerization: 120 seconds.

Application Method:

STRENGTHENING

1. Removal of the previous layer.

2. Do not shape the nail with a file or leave a 2 mm length, which you will remove after leveling.

3. Surface Preparation:

   • Gently buff the nail surface with a 220 grit file to lift the nail plate scales, or use a 100 grit buffer.

   • Perform a manicure.

   • If using cuticle removers, wash your hands with soap after use.

4. Cleaning:

   • Degrease the nail using Nail Prep LUNAmoon. Repeat twice, use 4 wipes (one wipe for 5 fingers).

   • First step: Wipe the nail surface.

   • Second step: Wrap a wipe around an orange wood stick and clean the cuticle area and sidewalls.

5. Primer (optional):

   • If the base underlay has sufficient acidity, primer is not needed.

6. Application of the underlay:

   • Apply the Rubber Base LUNAmoon underlay using a flat gel brush. Apply with rubbing motions, fill all nail folds, and cure under the lamp for 60 seconds.

   • Wipe off the sticky layer.

7. Leveling:

   • When working with gel, leave a 0.5–1 mm gap from the cuticle. Cure under the lamp for 60 seconds.

8. Shaping:

   • Shape the nail after leveling to create an edge that supports the free edge.

   • For thin nails, file 1 mm of the natural nail from the underside to prevent material lifting.

9. Finishing:

   • After filing, wipe off the sticky layer, apply gel polish, and then top coat.

   • Cure for 120 seconds. Do not wipe after curing to preserve the shine.